TM 9-2350-247-20-3
REPLACE M66 RING MOUNT KIT — Continued
0514 00
7.
Remove eight lock nuts (1), washers (2), and screws (3) from two front supports (4) and ring mount (5). Discard lock
nuts.
8.
Remove four screws (6), washers (7), and lock nuts (8) from two rear supports (9) and ring mount (5). Discard lock nuts.
9.
Remove ring mount (5) with suitable lifting device.
10. Remove four screws (10), lock nuts (11), six washers (12), and two rear supports (9) from transverse beam. Discard
lock nuts.
0514 00-3
