TM 9-2350-247-20-3
REPLACE M66 RING MOUNT KIT — Continued
0514 00
11. Remove eight screws (13), washers (14), and two front supports (4) from hull.
12. Remove cargo compartment floor plates (WP 0388 00). Remove eight screws (provided with kit) and two lifting eyes
(15) from stowage.
NOTE
See TM 9-1005-245-14 for disassembly of gun mount ring.
13. (H) Install lifting eyes (15) on hull with original eight screws (16). Tighten screws to 185 lb-ft (251 N•m) torque.
0514 00-4
