TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS
(M548A3) — Continued
0428 00
NOTE
Do Step 5 only if replacing fuel filter.
5.
Remove two screws (1), lockwashers (5), washers (4), nuts (6), and fuel filter (2) from bracket (3). Discard lock washers.
WARNING
Sparks can cause fire or explosion. Fuel can catch fire and burn you. Do not smoke. Wipe up
any spilled fuel immediately.
6.
Loosen seven clamp halves (3) on plenum sleeve (2) and heater (4).
7.
Loosen clamp (10) securing air inlet duct (11) to heater air inlet (12). Remove two screws (7), lock washers (8), and
washers (9) securing air inlet duct to bulkhead. Discard lock washers.
0428 00-2
