TM 9-2350-247-20-3
REPLACE CAB COVER AND FRAMES — Continued
0418 00
REMOVAL
1.
Remove machine gun hatch cover (1) from cab cover (2).
2.
Remove 15 lock nuts (3), washers (4), screws (5), 14 lock washers (6), and hatch cover retainer (7) that secure ring (8)
and gasket (9) to cover (2) and ring (10). Discard lock nuts and lock washers.
3.
Disengage 12 cover snaps (11) from snap studs (12) on each side of cab cover (2).
4.
Disengage tie-down rope (13) from tie-down cleats (14) at rear of cab.
5.
Pull cab cover (2) forward and let cover hang down in front of carrier.
0418 00-2
