TM 9-2350-247-20-3
REPLACE CAB COVER AND FRAMES Continued
0418 00
6.
Pull cab cover (1) back over bow (2).
7.
Secure 12 cover snaps (3) on snap studs (4) on each side of cab over (1) starting at front.
8.
Secure tie-down rope (5) under tie-down cleats (6) at rear of cab.
9.
Place retaining ring (7) with gasket (8) on cable cover (1). Secure with ring (9), 15 screws (10), washers (11), 14 new
lock washers (12), hatch cover retainer (13) and 15 nuts (14). Tighten nuts to 20-25 lb-in (27-40 Nm) torque.
10. Install machine gun hatch cover (15) on cab cover (1).
0418 00-7