TM 9-2350-247-20-3
REPLACE CARGO DOOR Continued
0402 00
ADJUSTMENT
1.
Loosen four screws (1) in right control bracket (2) or left control bracket (3) to be adjusted.
2.
Add or remove spacer plates (4) to produce 1/4 - 1/2 inch (6 - 13 mm) compression of seals.
3.
Close cargo door (5) and line up two handle lock pins (6) with top and bottom hull catches (7) (right side only).
4.
Secure adjustment with four screws (1).
5.
Adjust cargo door handle (8) and linkage on right side of cargo door (5) until two handle lock pins (6) line up with top
and bottom hull catches (7) (right side only).
FOLLOW-THROUGH STEPS
1.
Close cargo door (see your -10).
END OF TASK
0402 00-8