TM 9-2350-247-20-2
REPLACE BRAKE CONTROL LINKAGE (M548A3) -- Continued
0348 00
INSTALLATION
NOTE
Do not tighten screws to bearing (1), bearing (2) or bearing (3) until shaft (4), shaft (5), link (6).
and link (7) are installed and aligned for proper operation.
1.
Position shaft (4) into hull opening under floor plate. Slide bearing (1) over shaft right side.
2.
Install key (8), pedal (9), and bearing (2) on shaft (4). Secure with washer (10) and new lock nut (11).