TM 9-2350-247-20-2
REPLACE BRAKE CONTROL LINKAGE (M548A3) -- Continued
0348 00
NOTE
Position bearings and heads of screws as shown to avoid binding of the linkage.
6.
Install key (1) in the middle of shouldered shaft (2), connecting link (3), spacer (4), and bearing (5) on shouldered shaft.
Position shouldered shaft between two mounts. Secure bearing to mount with two screws (6), four washers (7), and two
new lock nuts (8).
7.
Install bearing (9) on shouldered shaft (2) and secure to right mount with two screws (10), four washers (11), and two
new lock nuts (12).
8.
Install spacer (13), key (14), and connecting link (15) on shouldered shaft (2) and secure with washer (16) and new lock
nut (17).
0348 00-7