TM 9-2350-247-20-2
REPLACE DIFFERENTIAL GASKET (M548A1) -- Continued
0344 00
INSTALLATION
1.
Clean threads of 14 screws (1) with cleaning compound.
2.
Apply light coat of antiseize compound to threads of 14 screws (1).
3.
Place new gasket (2) and new differential cover (3) on differential gearbox (4).
4.
Secure differential cover (3) in place with 14 new key washers (5) and screws (1). Tighten screws to 252-300 lb-in
(29-34 Nm) torque. Bend tabs on key washers.
5.
Install dipstick (6) through differential cover (3).
FOLLOW-THROUGH STEPS
1.
Check oil level in differential gearbox (WP 0128 00).
2.
Lower center seat (see your -10).
END OF TASK
