TM 9-2350-247-20-2
REPLACE FINAL DRIVE VENT, FILLER TUBE, AND FITTINGS (LEFT SIDE) -- Continued
0330 00
INSTALLATION
1.
Clean elbow (1) and elbow(2) with cleaning compound.
2.
Coat threads of elbow(1) and elbow(2) with antiseize compound.
3.
Install elbow (1) with new preformed packing (3) in final drive (4).
4.
Install elbow (2) in final drive (4).
5.
Install extension tube (5) on elbow (1). Secure to final drive (4) with clamp (6), new tab washer (7), and screw (8).
6.
Install vent tube (9) between elbow (2) and extension tube (5).
7.
Tighten nut (10) on elbow (1).
8.
Install filler neck (11) in extension tube (5).
9.
Install clamp (12), new lock nut (13), and screw (14) to secure filler neck (11) to final drive (4).
10. Insert gauge rod (15) in filler neck (11) and turn to the right to lock in filler neck.
FOLLOW-THROUGH STEPS
1.
Install left final drive (WP 0326 00).
END OF TASK
