TM 9-2350-247-20-2
REPLACE FUEL CONTROL SHAFT AND LINKAGE (M548A3) -- Continued
0202 00
5.
Loosen nut (1) and remove rod bearing (2) from connecting link (3).
6.
Remove cotter pin (4) and headed pin (5) from upper connecting link (6), if damaged or worn out. Discard cotter pin.
7.
Remove lock nut (7) and washer (8) securing upper connecting link (6) to shouldered shaft (9). Remove connecting link
(6) and machine key (10) from shouldered shaft (9). Discard lock nut.
8.
Loosen screw (11) and lock nut (12), securing lower connecting link (13) to shouldered shaft (9).
9.
Remove two lock nuts (14), four washers (15), and two screws (16), securing upper sleeve bearing (17) to upper bracket.
Remove upper sleeve bearing (17) from upper bracket and off shouldered shaft (9). Discard lock nuts.
0202 00-3
