TM 9-2350-247-20-2
REPLACE THROTTLE PEDAL CONTROL/DETENT (M548A1) -- Continued
0196 00
10. Remove two lock nuts (20) and screws (21) from detent block (22). Remove detent block (22) from throttle pedal (2).
Discard lock nuts.
11. Remove two jam nuts (23), screws (24), springs (25), and balls (26) from detent block (22).
12. Remove detent plunger (27) and spring (28) from detent block (22).
INSTALLATION
1.
Install detent plunger spring (1) and detent plunger (2) in detent block (3).
2.
Install two balls (4), springs (5), and screws (6) in detent block (3). Secure two screws with jam nuts (7).
3.
Place detent block (3) in bracket on throttle pedal (8). Secure with two screws (9) and new lock nuts (10).
