TM 9-2350-247-20-2
REPLACE THROTTLE PEDAL CONTROL/DETENT (M548A1) -- Continued
0196 00
11. Install link pin (1) in throttle pedal (2). Secure with washer (3) and new cotter pin (4).
12. Install hand throttle control cable (5) through link pin (1) and into retainer collar (6). Secure cable in retainer with
setscrew (7).
13. Adjust hand throttle (WP 0194 00).
14. Start engine (see your -10). Check throttle pedal control and detent for proper operation.
FOLLOW-THROUGH STEPS
1.
Install throttle floor plate (WP 0394 00).
2.
Lower left center seat floor plate (WP 0394 00).
3.
Lower center seat (see your -10).
END OF TASK
0196 00-5/6 blank
