TM 9-2350-247-20-2
REPLACE HAND THROTTLE CONTROL -- Continued
0192 00
INSTALLATION
1.
Place throttle control adapter (1) on bulkhead. Secure with adapter washer (2) and adapter nut (3).
2.
Insert hand throttle control cable (4) in instrument panel, through washer (5) and nut (6). Secure nut and washer to hold
control cable in place.
3.
Insert hand throttle control cable (4) through two grommets (7), adapter nut (3), adapter washer (2), bulkhead, and
throttle control adapter (1).
4.
Secure hand throttle control cable (4) to throttle control adapter (1) with clamp (8), two screws (9), and two new lock
nuts (10).
5.
Install link pin (11) and washer (12) on accelerator pedal (13). Secure with new cotter pin (14).
6.
Install hand throttle control cable (4) in link pin (11) and retainer collar (15). Secure throttle control cable to retainer
collar with setscrew (16).
7.
Install three clamps (17) on hand throttle control cable (4).
8.
Install three clamps (17) on hull nuts (18) with three new lock washers (19) and screws (20).
