TM 9-2350-247-20-2
REPLACE AIR PUMP
THIS WORK PACKAGE COVERS:
Removal (page 0191 00-1).
Installation (page 0191 00-2).
INITIAL SETUP:
Maintenance Level
Equipment Condition
Unit
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery negative lead(s) disconnected (WP 0292 00)
Tools and Special Tools
Top left grille removed (WP 0390 00)
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Cab personnel seats raised (see your -10)
Personnel Required
Unit Mechanic
References
See your -10
REMOVAL
1.
Remove two nuts (1) and washers (2). Disconnect two electrical leads (3) from air pump (4).
2.
Disconnect air hoses (5) from air pump (4).
3.
Remove screw (6), washer (7), clamp (8), and air pump (4) from bracket (9).
4.
Remove four screws (10), eight washers (11), and four nuts (12) from bracket (9). Remove bracket.
