TM 9-2350-247-20-2
REPLACE FUEL FILLER TUBES, HOSES, AND FITTINGS -- Continued
0165 00
INSTALLATION
1.
Place new gasket (1) and lower filler neck (2) on fuel compartment. Secure with four screws (3) and washers (4).
2.
Install hose (5) and clamp (6) on lower filler neck (2).
3.
Align new gasket (7) and upper filler neck (8) with hoses in hull. Connect hose (5) to upper filler neck (8). Secure with
clamp (9).
4.
Connect vent hose (10) to upper filler neck (8) and vent tube (11). Secure with two clamps (12).
5.
Install retainer (13) and strainer (14) in upper filler neck (8).
6.
Align new gasket (15) and filler neck flange (16) with upper filler neck (8). Secure with six screws (17) and washers (18).