TM 9-2350-247-20-2
REPLACE FUEL COMPARTMENT TUBES, HOSES, AND FITTINGS (M548A3) --
0166 00
Continued
NOTE
Use suitable container to catch fuel when tubes, hoses, and fittings are removed.
2.
Remove two screws (1), lock washers (2), and two clamps (3) and two clamps (4) from two weld nuts (5) and fuel pump
inlet hose (6) and inlet hose (7). Discard lock washers.
3.
Remove four screws (8), lock washers (9), and four clamps (10) from four weld nuts (11). Discard lock washers.
4.
Loosen nut (12) on elbow (13). Disconnect pickup tube (14) and seal (15) from elbow. Discard seal.
0166 00-2