TM 9-2350-247-20-2
REPLACE AIR CLEANER ELBOW AND INLET DUCT ASSEMBLIES (M548A3) --
0161 00
Continued
5.
Install two washers (5), new lock washers (14), and screws (15) to secure inlet duct (11) to carrier. Tighten screws to 22
to 24 lb-ft (30 to 33 Nm) torque.
6.
Tighten four lock nuts (6) on upper end of inlet duct (11) to 25 to 27 lb-ft (34 to 37 Nm) torque.
7.
Position flexible duct (16) on inlet duct (11) and tighten clamp screw.
FOLLOW-THROUGH STEPS
1.
Lower center seat (see your -10).
END OF TASK
0161 00-4
