TM 9-2350-247-20-1
REPLACE ENGINE OIL FILTER ELEMENT HOSES AND FITTINGS (M548A3) Continued
0142 00
REMOVAL
NOTE
Dispose of engine oil in accordance with Standard Operating Procedures.
1.
Place clean container of at least 1 quart (1 liter) capacity under engine oil cooler. Disconnect inlet hose (1) from adapter
(2) and outlet hose (3) from adapter (4) on engine oil cooler.
2.
Remove adapter (2) and adapter (4) from engine oil cooler.
3.
Disconnect inlet hose (1) from elbow (5) and outlet hose (3) from elbow (6) on oil filter head (7).
4.
Remove elbow (5) and elbow (6) from oil filter head (7).
5.
Remove two straps (8) from hose (1) and hose (3). Discard straps.
6.
Remove two straps (8) from hose (1) and hose (3). Discard straps.
0142 00-2