100 AMP CHARGING SYSTEM MALFUNCTIONS (M548A1)Continued

100 AMP CHARGING SYSTEM MALFUNCTIONS (M548A1)Continued - TM-9-2350-247-20-1_185

100 AMP CHARGING SYSTEM MALFUNCTIONS (M548A1)Continued - TM-9-2350-247-20-1_187

TM-9-2350-247-20-1 Crane (CAB) Components Recovery Vehicle Full Tracked: light Armored M578 (2360-00-439-6242) (EIC:3LA) Manual
Page Navigation
131

TM 9-2350-247-20-1 100 AMP CHARGING SYSTEM MALFUNCTIONS (M548A1)—Continued 0023 00 6Y 1. Measure resistance between harness plugs (1) and C2 (2), sockets A (3) to A (4) and C (5) to C (6). 2. Does multimeter read 0 ohms each time? YES NO 6YN 1. Repair/replace harness (WP 0294 00). 2. Verify no faults found. 7Y 1. Remove four screws (4) and regulator (3) from regulator plate (5). 2. Measure resistance between regulator jack (1), regulator jack (6), socket C (7) to pin A (8), and socket D (9) to pin C (10). 3. Does multimeter read 0 ohms between socket D (9) and pin C (10), and infinity between socket C (7) and pin A? YES NO 7YN 1. Replace regulator (WP 0249 00). 2. Verify no faults found. 0023 00-4

Privacy Statement
Press Release
Contact