TM 9-2350-287-10
CONVEYOR CHAIN MAINTENANCE
WARNING
Keep hands clear of conveyor hinges during maintenance
procedures.
Conveyor Chain Pad Replacement
NOTE
Replacechain pad(s) when pad is bent or when metal that could
damage projectile bands is exposed.
It is not necessary to remove chain link(s) to replace damaged
conveyor pad(s).
1.
Turn off hydraulic system.
Use conveyor manual crank to move damaged pad (2) to bottom side of conveyor.
2.
Insert chisel between pad (2) and plate (1). Tap with hammer to cut four rivets (3).
Remove rivets (3) using a hammer and punch, and remove pad (2).
3.
3-40