OPERATING THE CONVEYOR - Continued
Before unlocking center hinges, operate upper rear door
to raise conveyor above horizontal. This will make sure
that conveyor clears the ground and operators feet during
NEVER unlock center hinges unless cables are attached.
Failure to heed this warning will allow the conveyor to
collapse, causing damage or serious injury.
8. Operate upper rear door to raise the conveyor above horizontal,
9. To unlock hinges at conveyors center section, pull out on red handles (14).
Remove loops (15) from hooks (16).
10. To fold conveyor into vehicle:
a Position door at maximum height (120 degrees from closed).
b. Push down firmly on conveyor handles.
c. Push forward and up quickly and firmly.
d. After conveyor is folded inside vehicle, lift up on outboard con-
veyor end and place it on bracket (17).