REPLACE/REPAIR INVERTER AC CABLE (W5) (M1068 ONLY) -- Continued
Install new or repaired harness W5 in carrier. Route terminal ends (1) of W5 through back of inverter housing A2 (2) to
the front for connection.
Install five terminal leads E1 through E5 (1) of W5 to inverter terminal block TB2 (3) with five screws (4).
Attach faceplate (5) to front of inverter housing A2 (1) using ten screws (6) and new lockwashers (7).
Connect cable W5 P6 (8) to power control box A1 jack J27 (9).
Connect battery ground lead (WP 0294 00).
Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK