TM 9-2350-261-20-4
REPLACE DC BATTERY CABLE (W4) (M1068 ONLY) -- Continued
0740 00
INSTALLATION
1.
Install W4 cable in carrier.
2.
Install circuit ground lead 32 (1) to post G3 (2) on carrier hull. Secure with new lockwasher (3) and screw (4).
3.
Connect cable W4 P1 (5) to power control box jack J25 (6).
4.
Route cable through six clamps (7). Secure with six screws (8).
5.
Secure cable with eight new tie straps (9).
6.
Connect cable W4 E2 to positive battery terminal (10) with screw (11) and nut (12).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly. See TM
11-7010-256-12&P.
3.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK