T M
45.
46.
47.
9-2350-261-20-2
Disconnect circuit 59 lead (1) from
blower (2).
Remove screw (3), lockwasher (4), clamp (5),
and circuits 59 and 415 leads (1 and 6)
from weldnut (7). Discard lockwasher.
If NBC unit is installed, disconnect circuit
415 lead (6) from NBC unit.
48.
49.
50.
Remove four screws (8), nuts (9), and
circuit 48 (10) from bracket (11).
Remove screw (12), two lockwashers (13),
circuit 48 capacitor (14), and ground lead
(15) from weldnut (16). Discard lockwashers.
Remove six screws (17), clamps (18), and
circuit 48 lead (10) from six weldnuts (19).
12-88
