TM 9-2350-261-20-2
7.
8.
9.
10.
Remove eight cradle clips (1) and rear main 11.
wiring harness (2) from eight cradles (3).
Disconnect four circuit 38 leads (4) from
four right side dome lights (5).
12.
Remove 16 cradle clips (6) and rear main
wiring harness (7) from 16 cradles (8).
13.
Disconnect circuit 38B lead (9) from rear
Remove two screws (11), one lockwasher
(12), two clamps (13), circuit 38B lead (9),
and ground lead (14) from two
weldnuts (15). Discard lockwasher.
Disconnect four circuit 38C leads (16) from
four left side dome lights (17).
Remove screw (18), two lockwashers (19),
and ground leads (20) from weldnut (21).
blackout dome light (10).
14.
Discard lockwasher.
Remove eight screws (22), nuts (23), and
two circuit 48 connectors (24) from
bracket (25).
GO TO NEXT PAGE
12-83