TM 9-2350-261-20-2
31
32.
33.
34.
Disconnect circuits 21, 22, 23, and 24 leads
(1, 2, 3, and 4) from trailer wiring
harness (6).
Disconnect circuit 451 lead (6) from rear
bilge pump (7).
Remove screw (8), clamp (9), two
lockwashers (10), trailer wiring harness
ground lead (11), and wiring harness (12)
from weldnut (13). Discard lockwashers.
Pull circuits 21, 22, 23, 24, and 451 leads
(1, 2, 3, 4, and 6) through opening in
transverse beam.
35.
36.
37.
38.
Remove two screws (14), clamps (15), and
wiring harness (12) from two weldnuts (16).
Remove eight cradle clips (17) and wiring
harness (12) from eight cradles (18).
Disconnect circuit 38C lead (19) from left
dome light (20).
Disconnect circuit 38B lead (21) from front
blackout light (22) and cables W28 and
W35.
12-86
Change 3