TM 9-2350-261-20-2
39. Remove four screws (1), nuts (2), and circuit
48A lead (3) from bracket (4).
40. Remove two screws (5), lockwashers (6),
clamps (7), and circuit 48A lead ( 3 ) from
two weldnuts (8). Discard lockwashers.
41. Remove screw (9), three Iockwashers (10),
and ground leads (11) from weldnut (12).
Discard lockwashers.
42. Remove cradle clip (13) and rear main
wiring harness (14) from cradle (15).
43. Remove screw ( 16), cradle (15), circuit 48C
capacitor ( 17), and lockwasher (18) from
weldnut (19), Discard lockwashers.
44. Remove 12 screws (20), nuts (21), and 3
circuit 48 leads (22) from bracket (23).
GO TO NEXT PAGE
12-87