TM 9-2350-247-20-2
REPLACE TRANSFER GEARCASE OIL LEVEL GAUGE ROD AND FILLER NECK
0331 00
(M548A1) -- Continued
INSTALLATION
1.
Coat outside threads of elbow (1) with sealing compound.
2.
Install new preformed packing (2), washer (3), and nut (4) on elbow (1). Install elbow in transfer gearcase.
3.
Install angle bracket (5) on fuel filter bracket with screw (6), washer (7), and nut (8)
4.
Install filler neck (9) on elbow (1). Secure to angle bracket (5) with clamp (10), screw (11), washer (12), and nut (13).
5.
Install gauge rod (14) in filler neck (9).
FOLLOW-THROUGH STEPS
1.
2.
Add oil (WP 0128 00).
3.
Start engine (see your -10).
4.
Check for oil leaks.
5.
Stop engine (see your -10).
6.
Install power plant rear access cover/door (see your -10).
END OF TASK