|
| |
TM 9-2350-287-34
9-3. ENGINE COMPARTMENT BULKHEAD INSULATION AND SHIELDS REPLACEMENT
(continued).
5.
Remove 16 screws (12) and washers (11) from shield (23) and bulkhead (4). Remove four screws (14),
washers (13), and shield (23) from bulkhead (4).
6.
Remove three screws (21), washer (22), and shield (20) from bulkhead (4).
7.
Disconnect fuel hose (16 and 18) from fittings(15 and 17). Remove shield (19) from bulkhead (4).
8.
Remove two screws (24) and lockwashers (25) from peresonnel heater exhaust duct (26). Discard lockwasher.
9.
10.
11.
Remove six screws (29), four washers (28), two washers (33), and shield (27) from bulkhead
Remove 12 screws (31), washers (32), and two grilles (30) from shield (27).
Inspect shields (3, 10, 19,20,23, 27) for cracks, bends, or breaks. Replace if necessary.
9-9
|
