|
| |
TM 9-2350-287-34
9-3. ENGINE COMPARTMENT BULKHEAD INSULATION AND SHIELDS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tool/Test Equipment:
Personnel Required: Three
• General mechanic’s tool kit (Item 19,
Appendix D)
Equipment Conditions:
• Powerpack removed (refer to
Materials/Parts:
TM 9-2350-287-20-1).
• Adhesive (Item 2, Appendix B)
• Lower fuel tank removed (para 4-4).
• Drycleaning solvent (Item 9, Appendix B)
• Engine mount release bar removed (para 3-5).
• Rag (Item 17, Appendix B)
• Engine air cleaner ducts and hoses removed
• Sealing compound (Item 21, Appendix B)
(refer to TM 9-2350-287-20-1 ).
a.
REMOVAL
To remove shield
To remove shield
NOTE
(3), perform steps
(23), perform step
To remove shields (19, 20, and 27),
1.
Unscrew two nuts (5) and remove tube (6).
1 through 3.
5.
perform steps 1 through 12.
2.
Remove 13 screws (1), eight washers (7) and five washers (2) from shield (3) and bulkhead (4).
3.
Remove shield (3) from bulkhead
4.
Remove two screws (8), washers
(4).
(9), and shield (10) from bulkhead (4).
9-8
|
