| |
TM 9-2350-287-34
6-2. RECTIFIER MAINTENANCE (continued).
c.
ASSEMBLY
NOTE
Perform step 1 only if capacitor board assembly was removed.
1.
Apply two pieces of pressure-sensitive tape to back of capacitor board assembly (46 or 48). Peel protective
coating from tape, and install capacitor board assembly (46 or 48) on housing (10).
2.
Install electrical lead (51) in housing (10)
with screw (53) and new Iockwasher (52).
3.
Coat mating surfaces with silicone
lubricant, and install six screws (45) and
new Iockwashers (44) and three diode
assemblies (43) on housing (10).
4.
Install diode (47) in housing (10) and
secure with insulator (49) and nut (50).
6-8
|