|
| |
TM 9-2350-287-34
6-2. RECTIFIER MAINTENANCE (continued).
5.
6.
7.
8.
9.
Install terminal stud (42) and two new Iockwashers (39), washers (40), and nuts (38) in housing (10). Install
positive bus bar (41) on terminal stud (42) with nut (38), new Iockwasher (39), and washer (40).
Remove hardware for positive bus bar (41). Install positive bus bar (41) on three diode assemblies (43) with
three screws (37), washers (36), and new Iockwashers (25).
Install ground terminal (35) on housing (10) with washer (33) and two new Iockwashers (29) and nuts (34).
Remove hardware for negative bus bar (24). Install negative bus bar (24) on three diode assemblies (43) with
three screws (27), washers (26), and new Iockwashers (25).
Install two electrical leads (31 and 32), washer (30), new Iockwasher (29), and nut (28) on ground terminal
(35).
6-9
|
