|
| |
TM 9-2350-287-34
6-2. RECTIFIER MAINTENANCE (continued).
3.
Test three diode assemblies (43) for continuity. Replace if defective.
4.
Inspect two connectors (13 and 21) for broken pins, and solder leads for breaks. Replace if damaged.
5.
Inspect capacitor board assembly (46 or 48) for cracks and loose or missing terminals. Replace assembly
if damaged.
6.
Test capacitor board assemblies (46 and 48) with red lead of multimeter on one capacitor terminal and black
lead on the other capacitor terminal. Multimeter should show continuity, then infinity (). If only continuity is
shown, replace capacitor board assembly (46 or 48).
7.
Reverse multimeter leads and repeat step 6.
6-7
|
