|
| |
TM 9-2350-287-20-2
21-16. AFES MANUAL DISCHARGE SYSTEM REPAIR (continued).
21.
22.
23.
24.
25.
26.
27.
28.
NOTE
Liberally lubricate all internal parts of
actuator assembly before installation.
Install actuator assembly (3) in vehicle with
four screws (15) and new Iockwashers (16).
Install five threaded fittings (2), two handle
cables (6 and 9) and three cylinder cables (1
and 17) in actuator assembly (3).
Loosely secure two cylinder cables (1) to
cable block (12) with nut (8) and nut (7) for
each cable.
Loosely secure lower cylinder cable (17) to
cable block (12) with two nuts (11 ).
Secure handle cable (9) to cable block (12)
with connector nut (1 O) and nut (11).
Loosely secure handle cable (6) to pin (4) by
tightening socket head setscrew (5).
Perform AFES actuator assembly cable
adjustment procedure (para 21-16).
Install cover (13) on actuator assembly (3)
with four screws (14).
21-65
|
