|
| |
TM 9-2350-287-20-2
17-3. CONVEYOR SUPPORT STRAP ASSEMBLY AND CABLE SUPPORT CLIPS
REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
l General mechanic’s tool kit (Item 24,
l Vehicle parked on level ground (refer to
Appendix l)
TM 9-2350-287-10).
l Upper rear door opened (refer to
Materials/Parts:
TM 9-2350-287-10).
l Cotter pin (Item 38, Appendix H)
a.
1.
2.
3.
4.
5.
2.
REMOVAL
Remove hook (9) of strap assembly (1 0) from
strap stud (2).
Remove strap stud (2) from ceiling.
Remove strap stud (1), with attached strap
assembly (10), from ceiling.
Remove eight screws (7) and four cable support clips
(6) from upper rear door (8).
Remove cotter pin (3) and hanger (5) from
bracket (4). Discard cotter pin.
pin (3).
Install four cable support clips (6) on upper rear
door (8) with eight screws (7).
b.
INSTALLATION
1.
Install hanger (5) on bracket (4) with new cotter
FOLLOW-ON MAINTENANCE:
l Close upper rear door (refer to TM 9-2350-287-10).
3.
Install strap stud (1), with attached strap
assembly (10), on ceiling.
4.
Install strap stud (2) on ceiling.
5.
Install hook (9) of strap assembly (10) on strap
stud (2).
17-3
|
