|
| |
TM 9-2350-287-20-2
16-3. BILGE PUMP AND STRAINER REPLACEMENT (continued).
b.
1.
2.
3.
4.
5.
6.
INSTALLATION
If new bilge pump is to be installed,
NOTE
shipping spacers must be removed from screws.
Position stiffener (7) and strainer (8) on bottom of bilge pump (5) and secure with four screws (9) and new
Iockwashers (10).
WARNING
Sealing compounds can burn easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If sealing compound gets on skin or clothing, wash immediately with
soap and water.
Apply light coat of antiseize compound to threads of elbow (11). Install elbow(11) in bilge pump (5).
Apply light coat of sealing compound
to threads of three screws (6).
Position bilge pump (5) in vehicle with
three screws (6).
Install clamp (3) and hose (1) on elbow
(11).
Install electrical connector (4) on bilge
pump (5).
FOLLOW-ON MAINTENANCE:
Install powerpack (para 3-2).
16-5
|
