|
| |
TM 9-2350-287-20-2
16-3. BILGE PUMP AND STRAINER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Sealing compound (Item 58, Appendix D)
Automotive adjustable wrench
LockWasher (4) (Item 192, Appendix H)
(Item 4, Appendix I)
General mechanic’s tool kit (Item 24,
Equipment Conditions:
Appendix I)
Powerpack removed (pars 3-2).
Materials/Parts:
Antiseize compound (Item 10,
Appendix D)
a.
REMOVAL
1.
Remove electrical connector (4) from
bilge pump (5).
2.
Loosen screw (2) on clamp (3). Remove
clamp (3) and hose (1) from elbow (11).
NOTE
To ensure proper installation, record
position of bilge pump before
removal.
3.
Remove three screws (6) and bilge pump
(5) from vehicle.
4.
Remove elbow (11) from bilge pump (5).
5.
Remove four screws (9) and Iockwashers
(10), strainer (8), and stiffener (7) from
bottom of bilge pump (5). Discard
Iockwashers.
1 6 -4
|
