|
| |
TM 9-2350-287-20-2
15-69. LEFT DUFFLE BAG STOWAGE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
TooI/Test Equipment:
l Lockwasher (22) (Item 177, Appendix H)
• Electric disk sander (Item 15, Appendix 1)
l General mechanic’s tool kit (Item 24,
Personnel Required: Two
Appendix 1)
Equipment Conditions:
Materials/Parts:
• Vehicle parked on level ground (refer to
• Cotter pin (3) (item 18, Appendix H)
TM 9-2350-287-10).
a.
1.
2.
3.
4.
5.
6.
7.
8.
b.
REMOVAL
Unhook and remove net (1) from eight left-side duffle bag stowage eyelets (5) and two bar assemblies (4 and
6).
Fold up shelf assembly (9) to relieve tension of two support chains (14).
Remove 16 screws (15) and Iockwashers (16) and right duffle bag stowage eyelets (5) from hull. Discard
Iockwashers.
With the aid of an assistant, remove three cotter pins (11) and pins (10) and shelf assembly (9) from bar
assembly (6). Discard cotter pins.
Remove three screws (2) and Iockwashers (3) and bar assembly (4) from hull. Discard Iockwashers.
Remove three screws (8) and Iockwashers (7) and bar assembly (6) from hull. Discard Iockwashers.
NOTE
Perform steps 7 and 8 only if support chains are damaged.
Grind peened end of each of four connecting link pins (13).
Remove four connecting link pins (13) and connecting links (12) and two support chains (14) from two duffle
bag stowage eyelets (5) and shelf assembly (9).
INSTALLATION
NOTE
Perform steps 1 and 2 only if support chains were removed.
1.
Install two support chains (14) on two duffle bag stowage eyelets (5) and shelf assembly (9) with four
connecting link pins (13) and connecting links (12).
15-178
|
