|
| |
TM 9-2350-287-20-2
15-62. DRIVER’S SEAT REPAIR (continued).
6.
7.
8.
9.
10.
11.
12.
13.
14.
Sealing compound can burn easily, can give off harmful vapors, and is harmful to skin
and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If sealing compound gets on skin or clothing, wash immediately with
soap and water.
Lightly coat threads of latch sleeve (48) with
sealing compound. Install latch sleeve (48)
and plunger (47) in seat support (11).
Install lift adjusting Iever (12) and spring (46)
in seat support (11) and secure with headed
pin (49) and new cotter pin (50).
Install two shafts (45) and lower support
bracket (51 ) in place on seat support (11 ).
Install four screws (40) and washers (41 )
and two shafts (45) in seat support (11).
Install nut (29) and adjusting screw (28) in
backrest support (30).
Install backrest support (30) on seat back
bracket (32) with screw (33) and new self-
Iocking nut (31).
Install backrest cushion (18) on backrest
(19) with eight screws (20).
Install backrest (19) on bracket (23) with
screw (21), two washers (22), and new self-
Iocking nut (34).
Install S-hook (26) and chain (25) on headed
pin (27). Install headed pin (27) in bracket
(23) and backrest support (30) and secure
with new Iockpin (24).
15-153
|
