|
| |
TM 9-2350-287-20-2
15-56. DRIVER’S HATCH SECURITY LATCH ASSEMBLY REPLACEMENT (continued).
b.
INSTALLATION
1.
Install stop screw (16) in latch hook (15).
2.
Install latch hook (15) on driver's hatch cover (1) with two screws (12), new Iockwashers (13), and washers
(14).
3.
Install mounting plate (3) on inside hull (2) with two screws (6), new Iockwashers (5), and washers (4).
4.
Install latch (8), washer bearing (10), and sleeve bearing (7) on mounting plate (3 ) with screw (1 1).
5.
Install ball plunger (9) in latch (8). Turn ball plunger (9) clockwise 1/8 turn after ball plunger (9) makes contact
with hull (2).
FOLLOW-ON MAINTENANCE:
• Close driver's hatch cover (refer to TM 9-2350-287-10).
15-139
|
