|
| |
TM 9-2350-287-20-2
15-53. DRIVER’S HATCH COVER REPLACEMENT (continued).
b.
1.
2.
3.
c.
1.
2.
3.
DISASSEMBLY
Remove Iockwire (20) from three screws (19) and three screws (21).
Discard Iockwire.
Remove three screws (19) and inner hatch cover arm (4) from
hatch cover (1).
Remove three screws (21) and outer hatch cover arm (9) from
hatch cover (1).
CLEANING AND INSPECTION
Clean all metal parts with soap and water.
Inspect all metal parts for cracks, bends, and
breaks. Replace any damaged or defective
parts.
Inspect hatch cover seal (23) and pad (22)
for tears. If damaged, replace hatch cover
seal and/or pad (para 15-54).
d..
1.
2.
3.
ASSEMBLY
Position outer hatch cover arm (9) in place on hatch cover (1) and secure with three screws (21).
Position inner hatch cover arm (4) in place on hatch cover (1 ) and secure with three screws (19).
With wire twister pliers, install new Iockwire (20) in three screws (19) and three screws (21 ).
15-131
|
