|
| |
TM 9-2350-287-20-2
15-32. UPPER REAR DOOR SEALS REPLACEMENT (continued).
WARNING
Sealing compounds can burn easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. if sealing compound gets on skin or clothing, wash immediately with
soap and water.
4.
Apply thin coating of adhesive to mounting surfaces of two seals (7 and 10) and upper rear door small doors
(8). Allow adhesive to dry until tacky,
5.
Install two seals (7 and 10) on upper rear door small doors (8).
WARNING
Sealing compounds can burn easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If sealing compound gets on skin or clothing, wash immediately with
soap and water.
6.
Apply thin coating of adhesive to mounting surfaces of two seals (11), seal (9), and upper rear door (l). Allow
adhesive to dry until tacky.
7.
Install two seals (11) and seal (9) on upper rear door (1).
FOLLOW-ON MAINTENANCE:
• Close upper rear door (refer to
TM 9-2350-287-10).
15-81
|
