|
| |
TM 9-2350-287-20-2
15-31. UPPER REAR DOOR REPLACEMENT (continued).
e.
1.
2.
3.
4.
5.
6.
7.
INSTALLATION
Install two spacers (10) and hinges (7) on vehicle hull with four nuts (12) and Iockwashers (11), eight washers
(9), and four screws (8) for each hinge (7).
Stand clear during lifting operations.
Upper rear door weighs approximately 300
pounds and can cause severe injury to personnel.
Attach hoist and sling to upper rear door lifting lug (18). Using hoist, lift upper rear door (3) into position on
vehicle.
Install upper rear door (3) on each of two hinges (7) with screw (17), two washers (6), and nut (5).
Install upper rear door (3) on upper rear door actuator (13) with four screws (20), washers (1 6), washers (19),
nuts (14), and new Iockwashers (15).
Remove sling and hoist from upper rear door lifting lug (18).
Remove canister storage rack restraint straps from upper rear door actuator (13).
Install two conveyor slings (4) on upper rear door (3) with two straight pins (1) and Iockpins (2).
FOLLOW-ON MAINTENANCE:
• Close upper rear door small doors (refer to TM 9-2350-287-10).
• Close lower rear door (refer to TM 9-2350-287-10).
15-77
|
