|
| |
TM 9-2350-287-20-2
15-31. UPPER REAR DOOR REPLACEMENT (continued).
d.
1.
2.
3.
4.
5.
6.
7.
15-76
ASSEMBLY
Install two bumpers (34) and bushings (33) on
bracket (37) with two screws (31), washers (32), new
Iockwashers (38), and new self-locking nuts (39).
Install bracket (37) on upper rear door bracket (40)
with two screws (35), four washers (36), and two
new Iockwashers (41), and new self-locking nuts
(42).
WARNING
Stand clear during lifting operations. Upper
rear door weighs approximately 300 pounds
and can cause severe injury to personnel.
NOTE
An assistant is needed to guide upper rear
door.
Using sling and hoist, turn over upper rear door (3).
Remove sling from upper rear door lifting lug (18).
Install two bumper assemblies (25) on upper rear
door (3) with four screws (27) and new Iockwashers
(26).
Install two latch assemblies (21 ) on upper rear door
(3) with eight screws (28) and new lockwashers (29).
Install two strikers (22) on two upper rear door small
doors (20) with four screws (24) and new lockwashers
(23).
Open two upper rear door small doors (20) until two
strikers (22) are secured by two latch assemblies
(21).
|
