|
| |
TM 9-2350-287-20-2
15-31. UPPER REAR DOOR REPLACEMENT (continued).
7.
8.
c.
1.
2.
3.
Remove two screws (35), self-locking nuts (42), and Iockwashers (41), four washers (36), and bracket (37)
from upper rear door bracket (40). Discard lockwashers and self-locking nuts.
Rernove two screws (31), self-locking nuts (39), lockwashers (38), washers (32), bushings (33), and bumpers
(34) from bracket (37). Discard Iockwashers and self-locking nuts.
CLEANING AND INSPECTION
WARNING
Drycleaning solvent is toxic and flammable. Always wear protective goggles and gloves, and
use only in a well-ventilated area. Avoid contact with skin, eyes, and clothing, and DO NOT
breathe vapors. DO NOT use near open flame or excessive heat.
Clean all metal parts with drycleaning solvent. Allow to air-dry.
inspect all parts for cracks, wear, or other damage. Replace unserviceable parts.
Inspect four hinge bearings (30). If damaged, use hammer and punch to drive four hinge bearings (30) out
of upper rear door (3), and install four new hinge bearings (30).
15-75
|
