| |
TM 9-2350-287-20-2
15-31. UPPER REAR DOOR REPLACEMENT (continued).
b.
DISASSEMBLY
1.
Release two upper rear door small doors (20) from two latch assemblies (21 ), and close two upper rear door
small doors (20).
2.
Remove four screws (24) and Iockwashers (23) and two strikers (22) from two upper rear door small doors
(20). Discard Iockwashers.
3.
Remove eight screws (28) and Iockwashers (29) and two latch assemblies (21) from upper rear door (3).
Discard Iockwashers.
4.
5.
Attach sling and hoist to upper rear door lifting lug (18), and remove slack.
WARNING
Stand clear during lifting operations. Upper rear door weighs approximately 300
pounds and can cause severe injury to personnel.
NOTE
An assistant is needed to guide upper rear door.
6.
Turn over upper rear door (3). Do not disconnect hoist and sling from upper rear door lifting lug (1 8).
15-74
Remove four screws (27) and lockwashers (26) and two bumper assemblies (25) from upper rear door (3).
|