|
| |
TM 9-2350-287-20-2
15-24. CANISTER DOORS REPAIR (continued).
1.
Apply adhesive to mounting surface of new pad (2) and canister door(l). Allow to dry until tacky, then install
pad (2) on canister door (1).
2.
Apply sealing compound to screws (14).
3.
Install two hinges (12) on canister door (1) with six screws (14) and new Iockwashers (15).
4.
Install plate spacer (7) and latch (6) on canister door (1) with four screws (3), new Iockwashers (4), and
washers (5).
1.
Attach sling to hoist and lifting lug (1 9).
• Door weighs about 150 pounds. Be careful when installing door.
• Personnel should stand clear during lifting operations. A swinging or shifting load
may cause severe injury.
NOTE
An assistant is needed to stabilize and position canister door.
2.
Using hoist and sling, lift canister door (1) into position on hull.
15-55
e . I N S T A L L A T I O N
|
