TM 9-2350-287-20-1
7-30. DOME LIGHT REPAIR (continued).
b.
1.
2.
3.
4.
5.
6.
7.
8.
9.
DISASSEMBLY
Remove screw (15), Iockwasher (14),
switch knob (13), nut (12), washer (11),
and gasket (10) from access cover (1 6).
Discard Iockwasher and gasket.
Loosen eight screws (17) with retaining
rings (18).
Separate access cover (16) from retainer
(9).
Disconnect electrical lead (20) at
connector (21). Remove access cover
(16) from retainer (9).
Remove nonmetallic seal (31) from access
cover (16). Discard seal.
Loosen three screws (23) and Iockwashers
(24), and remove three electrical leads
(25, 26, and 28) at switch (27). Remove
switch (27) from access cover (16).
Remove lamp (29) from access cover
(16).
Remove lamp (30) from access cover
(16).
Remove two screws (19), connector (21),
and preformed packing (22) from retainer
(9). Discard preformed packing.
7-84