c. ASSEMBLY - TM-9-2350-287-20-1

7-6. DRIVERS PORTABLE INSTRUMENT PANEL REPAIR.

DRIVERS PORTABLE INSTRUMENT PANEL REPAIR (continued)

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
690

7-6. DRIVER’S PORTABLE INSTRUMENT PANEL REPAIR (continued). 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. c. 1. 2. Remove panel (6) from instrument panel cover (7). Slide grommet (8) from over harness assembly (9). Disconnect 20 electrical connectors (12) at back of panel (6). Remove screw (13), Iockwasher (11), nut (10), and ground lead of harness assembly (9) from panel (6). Disard Iockwasher. Remove harness assembly (9) from instrument panel cover (7). Remove eight screws (24) and Iockwashers (25) from four lamp assemblies (14). Discard lockwashers. Remove four lamp assemblies (14) from front of panel (6). Remove two screws (16), washers (17), and Iockwashers (18), instruction plate (20), switch guard (21), and master switch (19) from panel (6). Discard Iockwashers. Remove coolant light lens (22) and hexnut (23) from panel (6). Remove coolant light socket (31 ) from panel (6). Remove 12 nuts (26) and Iockwashers (27) and six brackets (28) and indicators (30) from panel (6). Discard Iockwashers. Remove four Iockwashers (29) and studs (15) from panel (6). Discard Iockwashers. ASSEMBLY Install four studs (15) and new Iockwashers (29) in panel (6). Install six indicators (30) and brackets (28) and 12 new Iockwashers (27) and nuts (26) on panel (6). Install coolant light socket (31 ) on panel (6). 7-19 TM 9-2350-287-20-1

Privacy Statement
Press Release
Contact